M5Stack · ESP32 · 4.7" · 960×540
M5Stack M5Paper 4.7" (E-Paper) specifications
The M5Stack M5Paper 4.7" (E-Paper) is a 4.7" 960×540 display board by M5Stack, built around the ESP32 (ESP32-D0WDQ6-V3 module) running at 240 MHz. The panel uses a IT8951 (SPI, E-Paper controller) controller over SPI, with GT911 (I2C) touch input. Memory: 16 MB flash, 8 MB PSRAM; wireless: Wi-Fi and Bluetooth. In LCD Ultra Pro you can design its UI visually at the exact resolution; a ready-made display driver for the Arduino export is not available yet, so the export contains the LVGL UI code for your own project.
- Screen
- 4.7" · 960×540
- Chip
- ESP32
- Memory
- 16 MB flash, 8 MB PSRAM
- Input
- capacitive touch
Specifications
| Manufacturer | M5Stack |
|---|---|
| Screen size | 4.7" |
| Resolution | 960×540 px |
| Colour depth | 16-bit |
| Display controller | IT8951 (SPI, E-Paper controller) |
| Display interface | SPI |
| Touch | GT911 (I2C) |
| Microcontroller | ESP32 |
| Module | ESP32-D0WDQ6-V3 |
| CPU clock | 240 MHz |
| Internal SRAM | 520 KB |
| PSRAM | 8 MB |
| Flash | 16 MB |
| Wi-Fi | Yes |
| Bluetooth | Yes |
Free GPIOs and connectors
This board has no free GPIOs: every pin is used by the display, touch or on-board peripherals.
LVGL support in LCD Ultra Pro
| Driver status | Driver not available yet |
|---|---|
| Arduino export | LVGL 8.4 UI and event code only (bring your own display driver) |
| USB Live preview | No |
| Orientations | 0° |
| Brightness control | Software dimming layer |
Pick this board in the editor and the canvas matches its exact resolution and shape. Build the interface with widgets, add events without code, try it in Live Preview, then export it as LVGL UI code. See the documentation for the workflow.
Frequently asked questions
What is the resolution of the M5Stack M5Paper 4.7" (E-Paper)?
960×540 pixels on a 4.7" screen, driven at 16-bit colour depth.
Which display controller and interface does it use?
IT8951 (SPI, E-Paper controller) over SPI.
Does the M5Stack M5Paper 4.7" (E-Paper) have a touchscreen?
Yes — GT911 (I2C).
Which ESP32 chip and how much memory does it have?
ESP32 (ESP32-D0WDQ6-V3) at 240 MHz, 16 MB flash, 8 MB PSRAM.
Which GPIOs are free for my own sensors or relays?
None — every GPIO is used by the display, touch or on-board peripherals.
Can I use LVGL on the M5Stack M5Paper 4.7" (E-Paper)?
Yes, with your own display driver setup. In LCD Ultra Pro you can design the UI at the board’s exact resolution and export the LVGL 8.4 UI and event code; a ready-made display driver for this board is not included yet, so you call ui_init() from your own LVGL project.