Makerfabs · ESP32-P4 · 7.0" · 1024×600
Makerfabs MaTouch ESP32-P4 TFT with Touch 7" MIPI specifications
The Makerfabs MaTouch ESP32-P4 TFT with Touch 7" MIPI is a 7.0" 1024×600 display board by Makerfabs, built around the ESP32-P4 (ESP32-P4 + ESP32-C6 (separate WiFi/BT co-chip) module) running at 400 MHz. The panel uses a JD9165 / ST7701 DSI (MIPI-DSI 2-Lane) controller over MIPI-DSI, with GT911 (I2C, addr: 0x5D/0x14) touch input. Memory: 16 MB flash, 32 MB PSRAM; wireless: Wi-Fi and Bluetooth. In LCD Ultra Pro you can design its UI visually at the exact resolution; a ready-made display driver for the Arduino export is not available yet, so the export contains the LVGL UI code for your own project.
- Screen
- 7.0" · 1024×600
- Chip
- ESP32-P4
- Memory
- 16 MB flash, 32 MB PSRAM
- Input
- capacitive touch
Specifications
| Manufacturer | Makerfabs |
|---|---|
| Screen size | 7.0" |
| Resolution | 1024×600 px |
| Colour depth | 16-bit |
| Display controller | JD9165 / ST7701 DSI (MIPI-DSI 2-Lane) |
| Display interface | MIPI-DSI |
| Touch | GT911 (I2C, addr: 0x5D/0x14) |
| Microcontroller | ESP32-P4 |
| Module | ESP32-P4 + ESP32-C6 (separate WiFi/BT co-chip) |
| CPU clock | 400 MHz |
| Internal SRAM | 768 KB |
| PSRAM | 32 MB |
| Flash | 16 MB |
| Wi-Fi | Yes |
| Bluetooth | Yes |
Free GPIOs and connectors
This board has no free GPIOs: every pin is used by the display, touch or on-board peripherals.
LVGL support in LCD Ultra Pro
| Driver status | Driver not available yet |
|---|---|
| Arduino export | LVGL 8.4 UI and event code only (bring your own display driver) |
| USB Live preview | No |
| Orientations | 0° |
| Brightness control | Software dimming layer |
Pick this board in the editor and the canvas matches its exact resolution and shape. Build the interface with widgets, add events without code, try it in Live Preview, then export it as LVGL UI code. See the documentation for the workflow.
Frequently asked questions
What is the resolution of the Makerfabs MaTouch ESP32-P4 TFT with Touch 7" MIPI?
1024×600 pixels on a 7.0" screen, driven at 16-bit colour depth.
Which display controller and interface does it use?
JD9165 / ST7701 DSI (MIPI-DSI 2-Lane) over MIPI-DSI.
Does the Makerfabs MaTouch ESP32-P4 TFT with Touch 7" MIPI have a touchscreen?
Yes — GT911 (I2C, addr: 0x5D/0x14).
Which ESP32 chip and how much memory does it have?
ESP32-P4 (ESP32-P4 + ESP32-C6 (separate WiFi/BT co-chip)) at 400 MHz, 16 MB flash, 32 MB PSRAM.
Which GPIOs are free for my own sensors or relays?
None — every GPIO is used by the display, touch or on-board peripherals.
Can I use LVGL on the Makerfabs MaTouch ESP32-P4 TFT with Touch 7" MIPI?
Yes, with your own display driver setup. In LCD Ultra Pro you can design the UI at the board’s exact resolution and export the LVGL 8.4 UI and event code; a ready-made display driver for this board is not included yet, so you call ui_init() from your own LVGL project.