Waveshare · ESP32-C6 · 1.47" · 172×320
Waveshare ESP32-C6 1.47" LCD specifications
The Waveshare ESP32-C6 1.47" LCD is a 1.47" 172×320 display board by Waveshare, built around the ESP32-C6 (ESP32-C6FH4 module) running at 160 MHz. The panel uses a ST7789 (SPI) controller over SPI, without a touchscreen. Memory: 4 MB flash, no PSRAM; wireless: Wi-Fi and Bluetooth. In LCD Ultra Pro you can design its UI visually at the exact resolution; a ready-made display driver for the Arduino export is not available yet, so the export contains the LVGL UI code for your own project.
- Screen
- 1.47" · 172×320
- Chip
- ESP32-C6
- Memory
- 4 MB flash, no PSRAM
- Input
- no touch
Specifications
| Manufacturer | Waveshare |
|---|---|
| Screen size | 1.47" |
| Resolution | 172×320 px |
| Colour depth | 16-bit |
| Display controller | ST7789 (SPI) |
| Display interface | SPI |
| Touch | None |
| Microcontroller | ESP32-C6 |
| Module | ESP32-C6FH4 |
| CPU clock | 160 MHz |
| Internal SRAM | 512 KB |
| PSRAM | None |
| Flash | 4 MB |
| Wi-Fi | Yes |
| Bluetooth | Yes |
Free GPIOs and connectors
These GPIOs are not used by the display, touch or on-board peripherals, so you can wire your own sensors, buttons or relays to them.
| Pin | Capabilities | Note |
|---|---|---|
| GPIO 0 | GPIO, ADC | Free |
| GPIO 1 | GPIO, ADC | Free |
| GPIO 2 | GPIO, ADC | Free |
| GPIO 3 | GPIO, ADC | Free |
| GPIO 4 | GPIO, ADC | Free |
| GPIO 18 | GPIO, I2C_SDA | Free |
| GPIO 19 | GPIO, I2C_SCL | Free |
| GPIO 23 | GPIO, PWM | Free |
LVGL support in LCD Ultra Pro
| Driver status | Driver not available yet |
|---|---|
| Arduino export | LVGL 8.4 UI and event code only (bring your own display driver) |
| USB Live preview | No |
| Orientations | 0° |
| Brightness control | Software dimming layer |
Pick this board in the editor and the canvas matches its exact resolution and shape. Build the interface with widgets, add events without code, try it in Live Preview, then export it as LVGL UI code. See the documentation for the workflow.
Frequently asked questions
What is the resolution of the Waveshare ESP32-C6 1.47" LCD?
172×320 pixels on a 1.47" screen, driven at 16-bit colour depth.
Which display controller and interface does it use?
ST7789 (SPI) over SPI.
Does the Waveshare ESP32-C6 1.47" LCD have a touchscreen?
No. It has no touch input.
Which ESP32 chip and how much memory does it have?
ESP32-C6 (ESP32-C6FH4) at 160 MHz, 4 MB flash, no PSRAM.
Which GPIOs are free for my own sensors or relays?
8 GPIOs are free: GPIO 0, GPIO 1, GPIO 2, GPIO 3, GPIO 4, GPIO 18, GPIO 19, GPIO 23.
Can I use LVGL on the Waveshare ESP32-C6 1.47" LCD?
Yes, with your own display driver setup. In LCD Ultra Pro you can design the UI at the board’s exact resolution and export the LVGL 8.4 UI and event code; a ready-made display driver for this board is not included yet, so you call ui_init() from your own LVGL project.