Waveshare · ESP32-C6 · 1.43" · 466×466

Waveshare ESP32-C6 Touch AMOLED 1.43" round specifications

The Waveshare ESP32-C6 Touch AMOLED 1.43" round is a 1.43" 466×466 display board by Waveshare, built around the ESP32-C6 (ESP32-C6 module) running at 160 MHz. The panel uses a CO5300 (QSPI AMOLED) controller over QSPI, with FT6146 (capacitive, I2C) touch input. Memory: 16 MB flash, no PSRAM; wireless: Wi-Fi and Bluetooth. In LCD Ultra Pro you can design its UI visually at the exact resolution; a ready-made display driver for the Arduino export is not available yet, so the export contains the LVGL UI code for your own project.

Screen
1.43" · 466×466
Chip
ESP32-C6
Memory
16 MB flash, no PSRAM
Input
capacitive touch
Design a UI for this board Buy from Waveshare (affiliate link)

Specifications

Waveshare ESP32-C6 Touch AMOLED 1.43" round technical specifications
ManufacturerWaveshare
Screen size1.43"
Resolution466×466 px
Colour depth16-bit
Display controllerCO5300 (QSPI AMOLED)
Display interfaceQSPI
TouchFT6146 (capacitive, I2C)
MicrocontrollerESP32-C6
ModuleESP32-C6
CPU clock160 MHz
Internal SRAM512 KB
PSRAMNone
Flash16 MB
Wi-FiYes
BluetoothYes

Free GPIOs and connectors

These GPIOs are not used by the display, touch or on-board peripherals, so you can wire your own sensors, buttons or relays to them.

Free GPIO pins of the Waveshare ESP32-C6 Touch AMOLED 1.43" round
PinCapabilitiesNote
GPIO 0GPIO, ADCFree
GPIO 1GPIO, ADCFree
GPIO 2GPIO, ADCFree
GPIO 9GPIO, PWMFree
GPIO 15GPIO, PWMFree
GPIO 19GPIO, PWMFree / possibly an SD card pin, needs verification
GPIO 20GPIO, PWMFree / possibly an SD card pin, needs verification
GPIO 21GPIO, PWMFree / possibly an SD card pin, needs verification
GPIO 22GPIO, PWMFree / possibly an SD card pin, needs verification
GPIO 23GPIO, PWMFree

LVGL support in LCD Ultra Pro

LVGL and LCD Ultra Pro support for the Waveshare ESP32-C6 Touch AMOLED 1.43" round
Driver statusDriver not available yet
Arduino exportLVGL 8.4 UI and event code only (bring your own display driver)
USB Live previewNo
Orientations0°
Brightness controlSoftware dimming layer

Pick this board in the editor and the canvas matches its exact resolution and shape. Build the interface with widgets, add events without code, try it in Live Preview, then export it as LVGL UI code. See the documentation for the workflow.

Frequently asked questions

What is the resolution of the Waveshare ESP32-C6 Touch AMOLED 1.43" round?

466×466 pixels on a 1.43" screen, driven at 16-bit colour depth.

Which display controller and interface does it use?

CO5300 (QSPI AMOLED) over QSPI.

Does the Waveshare ESP32-C6 Touch AMOLED 1.43" round have a touchscreen?

Yes — FT6146 (capacitive, I2C).

Which ESP32 chip and how much memory does it have?

ESP32-C6 (ESP32-C6) at 160 MHz, 16 MB flash, no PSRAM.

Which GPIOs are free for my own sensors or relays?

10 GPIOs are free: GPIO 0, GPIO 1, GPIO 2, GPIO 9, GPIO 15, GPIO 19, GPIO 20, GPIO 21, GPIO 22, GPIO 23.

Can I use LVGL on the Waveshare ESP32-C6 Touch AMOLED 1.43" round?

Yes, with your own display driver setup. In LCD Ultra Pro you can design the UI at the board’s exact resolution and export the LVGL 8.4 UI and event code; a ready-made display driver for this board is not included yet, so you call ui_init() from your own LVGL project.