Free tools for ESP32 display boards
Small tools for the questions that come up before the first screen works: which board, which Tools menu settings, will these sensors clash. They run on the data of the 173 boards in the board wiki and the 62 parts in the parts wiki. No account needed.
Board finder
Narrow the ESP32 display boards down by size, resolution, touch, PSRAM, shape, display interface, CAN / RS485, battery and free GPIOs.
Arduino IDE settings
The board type, PSRAM mode, flash size and partition scheme to pick in the Tools menu, plus the library versions the driver was compiled with.
Pin planner
Pick a board and the sensors you want to add. It hands out the free GPIOs and warns about strapping pins, pins the display uses and I2C address clashes.
Board comparison
Two or three ESP32 display boards side by side: screen, controller, touch, PSRAM, free GPIOs and driver status, with the differences highlighted.
LVGL memory calculator
Estimate how much RAM your LVGL screens, widgets and images need, and how that compares with the SRAM and PSRAM of the board.
Boards by controller chip
Look up a display or touch controller (ST7789, ST7701, GT911, CST816…) and see which boards use it.
LVGL symbol browser
Every built-in LV_SYMBOL icon of LVGL 8.4 with a preview, its code point and UTF-8 bytes, ready to copy.
I2C address checker
Check if your I2C sensors can share one bus with the chips already on the board, and how to move an address.
Design the UI next
Build LVGL screens and events in the browser without code, then export an Arduino project.