ESP32 display board finder

Most ESP32 display boards look alike in a shop listing. The differences show up later: no PSRAM for a big screen, two free pins for your sensors, no battery connector. Set what you need and the list shrinks to the 173 boards in the board wiki that fit.

Shape
Display interface
Chip
On the board

173 of 173 boards match.

Design the UI next

Build LVGL screens and events in the browser without code, then export an Arduino project.

See how the editor works

How the filters read the data

Size, resolution, chip, PSRAM and touch come from each board's spec sheet. "Free GPIOs" counts the pins the board page lists as free, and some of those are shared with the USB serial port or a header, so read the note next to each pin before you plan on it.

CAN, RS485 and the battery connector are taken from the connectors and specs on the board page. A battery that only keeps the clock running doesn't count. If a board you know has one is missing, the board page probably doesn't mention it yet. Use the report link at the bottom of that page.

"Driver included" means the Arduino export ships a display driver for it. Only a few are verified on real hardware so far; the board wiki shows the status of each one.

More free tools